3 x 3 USB MIDI Interface The UM-3EX is the most innovative mid-sized MIDI interface on the market. The expandable design of the UM-3EX makes it the ideal MIDI interface for the small studio, but allows you to daisy-chain up to three units together for a total of nine MIDI inputs and outputs. The UM-3EX can be mounted into the RAF-70, a rackmount kit, making for a clean, expandable studio installation. The UM-3EX allows you to select between MIDI Out and MIDI Thru for each output port. The UM-3EX uses FPT (Fast Processing Technology) to ensure low-latency, low-jitter MIDI transmission, even with three devices daisy-chained together.
3-in/3-out MIDI ports (female)
MIDI OUT or THRU selectable switches built-in
Control up to 48 channels of MIDI equipment
Fast and stable MIDI data transmission realized by FPT
USB powered, AC Adaptor not required
Built-in USB hub
Connect up to 3 units 9-in/9-out
3-unit rack-mountable in a RAF-70* adaptor
3 in/3 out MIDI ports
MIDI OUT or THRU
Control up to 48 channels
Built-in USB hub
Product Information Specifications for Edirol UM-3EX 3 x 3 USB MIDI Interface Below:
Here's a great little audio interface you can use in any kind of studio setup. The MOTU 4pre combines four of MOTU's amazing, ultra-clean microphone preamplifiers with their compact half-rack chassis, whose all-metal robustness means you can take it anywhere. Do you use a Mac or a PC? The 4pre doesn't care. You can hook it up with USB 2.0 or FireWire 400, and it'll even accept bus power over FireWire - a real bonus if you're on the go. If you're staying put, the 4pre is right at home on your desktop, or you can rackmount it with the included rackmount kit. And check this out, not only does the 4pre sport MOTU's epic CueMix FX onboard software-controllable mixer, but it'll act as a 4-channel standalone mixer, without a computer. If you love great sound and total convenience, then the MOTU 4pre was made for you!
Coaxial digital output
RCA unbalanced line output
44.1 kHz/16-bit with iOS devices
48 kHz/16-bit and 44.1 kHz/16-bit with Mac/PC
Supplies power to the iOS unit when connected to a USB bus
Supports iOS 4.3 and later
Can act as a docking station for synchronization (30-pin connector only)
Tascam 2-track recording app can be downloaded from AppStore at no charge
TRS/XLR conversion cables included to connect sources with standard XLR cables
Mini jack/MIDI conversion cables included
Wej is an iOS music hub that combines a non-skid performance base with integrated light show and wireless MIDI for up to two controllers - all while keeping your iOS device charged. Wej's non-skid base is made of soft-touch silicone. It holds any iPad or iPhone at an angle optimized for the multitouch gestures called for when making and performing music. Wej wirelessly connects to iOS via Apple's Bluetooth MIDI Protocol. It features two USB MIDI ports, a high speed charging port, and 48 ultra bright RGB LEDs. By improving MIDI controller connectivity and power management, Wej turns your iOS device into a professional studio tool. Wej makes it possible to connect USB keyboards, drum pads and other class compliant USB MIDI controllers and create tempo-synced light shows all while keeping your iOS device charged. Wej is compatible with any iOS music app and it's designed to be the perfect surface for the Retronyms DJ and mashup workstation app, Hook.
Connection Cable for your iConnectMIDI2+ or iConnectMIDI4+. The Inline iOS Connection Cable connects the iConnectMIDI2+ and the iConnectMIDI4+ through USB Type B ports to your iOS device including iPod touch, iPhone and iPad through the 30-pin dock connector - giving you the best possible performance.
The MIDI Solutions Thru is a 1-in 2-out MIDI Thru Box. All MIDI messages appearing at the input are sent to both Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, insuring reliable operation in setups that require daisy chaining or long cable runs.
Wirelessly use any and all past, present, and future MIDI equipped devices! The AirPower2 MIDI transmitter from Starr Labs operates in the 2.4GHz range, giving the instrument an unobstructed range of 250 feet. The AirPower2 has built-in dropout protection and recovery for settings where obstructions and reflections are a problem. No more stuck notes! The AirPower2 Wireless MIDI System seamlessly recovers from momentary dropouts in transmission. Sixteen user-selectable channel spaced across the 2.4GHz band allow several AirPower2 links to operate on the same stage. The AirPower2 receiver is equipped with both MIDI and USB output for direct connection to a PC, Mac, Ipad, or Android device. Both USB and MIDI outputs can be used simultaneously. Perfect for studio and stage applications where MIDI cables just won't cut it!
An easy-to-use product that requires no programming, the MIDI Solutions Quadra Merge merges all messages appearing at any of its 4 inputs to its output. Requires no batteries or power supply to operate.
The MIDI Solutions M8 8-input MIDI Merger is an 8-in 1-out MIDI Merger. All MIDI messages appearing at any of the eight inputs are merged to the output. All MIDI data types are merged, including System Exclusive and MIDI Time Code. A fast merging algorithm insures that MIDI data is processed with minimal delay.
This cable is not manufactured by Korg, It is manufactured by Kray cables to our own specs and replaces the OEM Korg cable. Korg Interface Cable for M3. Replaces Korg SKU number 500475103752 with cable 2X as long
Very hard to find cable. Note that the pin configuration is different that most 9 pin applications. It uses the standard mini din 9 pin configuration with uneven pin spacing in the middle row. (See picture)
6 ft in length with a straight connector on both ends.