USB 2.0 Audio Interface with HDDA Mic Preamps Two XLR/TRS Mic/Line Inputs, 48V Phantom Power Onboard DSP Mixer Up to 96KHz/24-bit Recording Includes CUBASE LE SoftwareThe TASCAM US-322 USB Audio Interface features two high quality HDDA mic preamps, an onboard DSP mixer, up to 96kHz/24-bit recording and a wealth of features for superior sound. To ensure superior sound, TASCAM organized months of tests and trials to design the HDDA mic pre-amplifier. Manufactured with a discrete structure and select premium parts, the HDDA pre-amp achieves wider frequency response (10Hz to 68kHz), high S/N ratio, low noise and low THD+N.In the process of creating music, many engineers have started utilizing high-resolution formats while recording to ensure the best quality sounds. The US-322 is suited perfectly for these high-quality minded recordings. Includes CUBASE LE recording software, two XLR/TRS mic/line inputs with full support for 48V phantom power. Having both options for condenser mics and line level inputs ensures you are getting the best possible sound and lowest-noise when recording. In addition, INPUT-1 can connect any high-impedance equipment directly, like a guitar.The TASCAM US-322 features two high-quality HDDA (High Definition Discrete Architecture) mic pre-amps; Up to 24bit/96kHz recording; Two XLR/TRS (MIC/LINE) inputs with full +48V phantom power supply; Low-latency monitoring via DSP mixer; On-board digital mixer(DSP mixer) delivers two operation modes; On-board digital effects(DSP effects)(DSP effects can use on 44.1/48kHz operating); Dedicated "MIXER PANEL" button recalls DSP mixer with one-click; Oversized LINE OUT volume knob; Two TRS analog balanced outputs; Two RCA analog unbalanced outputs; 18mW+18mW headphone output; Desktop design provides highly stability and usability; Aluminum body provides premium looks and luxurious feel; USB bus-powered for mobile recording; Steinberg Cubase LE6 bundle;
Product Information Specifications for Tascam US-322 Below:
Manufacturer: DJ Tech Pro USA, LLC
Brand: DJ Tech
Welcome to the myScratch Pack - An ultimate computer DJ pack.Complete Pack for Computer Scratch DJ. The myScratch Pack includes everything you need for computer DJ: the myScratch USB DJ controller, the Soundbox Pro USB audio interface and the DJH-100 DJ headphones. Install the included Virtual DJ LE software, connect the controller and audio interface, and you are ready to DJ in only a few simple steps.Ultimate Scratch Performance. The myScratch is tailor-made for scratch performance. Its large high-resolution touch sensitive jog wheels provide tactile vinyl emulation. The unit also features an adjustable crossfader curve to provide customization options for every type of DJ. Classic layout with handy control. The myScratch has a classic 2-deck layout with 4 multi-purpose rubber buttons per deck. The highly responsive rubber buttons provide direct access to loop, hot cues, and samples. High Quality Material and Build Quality. All the parts are housed in a lightweight, yet sturdy high density plastic case with a glossy finish. For extended durability and secure grip for DJs, the myScratch provides rubber coating for all knobs and jog wheels.
1.9M Usb To Midi Interface Keyboard Adapter Cable For Pc Notebook Vista Mac Win Windows 7
Overview: 1.9m MIDI USB Cable Converter PC to Music Keyboard Adapter. Features 1. LATEST MODEL with a BUILT-IN DRIVER 2. Unlike others, it requires NO DRIVER INSTALLATION 3. True plug & play; Just plug it to any USB port on PC & it'll install itself 4. 1-in/1-out MIDI interface 5. 16 MIDI input channels/16 MIDI output channels 6. MIDI activity indicators for each port 7. USB bus powered; Requires no external power 8. Extremely compact and lightweight 9. Length: 1.9 m Connectors: 2 x 5-Pin MIDI Plugs 1 x USB Plug Instructions for Use: 1. Connect the cable marked "IN" to the MIDI "OUT" socket of a MIDI keyboard (or MIDI device) 2. Connect the cable marked "OUT" to the MIDI "IN" socket of a MIDI keyboard (of MIDI device) 3. Plug the USB cable into any free USB socket on your computer, the red LED will light to show power on 4. Open your music software program, e.g. Cubase, Sonar, MIDI Connections, ect 5. Set the music programs MIDI in and MIDI Out devices to "USB Audio Device" 6. Your USB to MIDI interface is now ready for use 7. To save potential problems, it is recommended that this interface is always connected to the same USB as it was originally installed on to prevent multiple installations of the driver Â¡Â¡ Package Includes 1 x USB MIDI cable
Compatible with ProTools M-Powered Software! The FireWire 18/14 is an 18-in, 14-out audio interface complete with ADAT Lightpipe for multi-channel communication with other digital devices. It features 8 x 4 analog I/O at up to 24-bit/96kHz, and boasts 192kHz on the first two inputs and all four outputs. Channels 1 and 2 also include high-quality microphone/instrument preamps. S/PDIF optical digital I/O provides 2-channel PCM, as well as pass-through of surround-encoded AC-3 and DTS material. Flexible internal mixing allows input and output routing, including an aux bus for effects send or monitor mix. A front-panel momentary switch allows allows DJ-style headphone auditioning between two assignable sources. Other features include two headphone amplifiers, assignable level controller, S/PDIF coaxial/optical digital I/O, 1 x 1 MIDI I/O, and BNC word clock connectors for synchronization to other digital devices. 18 x 14 FireWire audio interface 8 x 24-bit/96kHz analog inputs (1/4? TS) 4 x 24-bit/96kHz analog outputs (1/4' TRS/TS) 2 x 4 24-bit/192kHz analog I/O capability 8 x 8 ADAT Lightpipe I/O digital S/PDIF (coaxial) I/O w/ 2-channel PCM digital out also supports pass-through of AC-3/DTS surround-encoded content dual mic/instrument preamps (Neutrik XLR/ 1/4? TS) with: input level controls; 20dB pad; phantom power; signal LEDs two independently assignable headphone outputs with individual level controls (1/4" TRS) flexible software...
Premium-quality audio interface for your iOS device, that's ready for any studio. TASCAM's iU2 is a premium sound quality audio interface for the iPad, iPhone and iPod Touch. It includes all of the features of TASCAM's best-selling USB audio interfaces, including a pair of precision audio microphone inputs. The XLR inputs have phantom power for use with high-quality condenser microphones. These feed an onboard microphone preamp and A/D converter for better sound performance than those built into iPhone and iPad - true stereo recording with low noise and less tendency to distort. The inputs also accept line-level signals or you can plug a guitar or bass directly into your device.In addition to compatibility with iOS devices, the iU2 also works with Mac and Windows computers. A zero-latency monitoring path allows musicians to hear themselves directly through the unit, without any distracting delay. Both MIDI in and out are provided to easily interface with synths and drum machines, and a digital output connects to digital mixers or recorders.Features Audio/MIDI Interface for Mac, Windows and iOS devices Compatible with iPhone, iPad and iPod Touch Two XLR mic inputs with phantom power Two balanced line inputs Instrument-level input for guitar or bass MIDI in and out Onboard A/D conversion for low-noise and distortion when recording with iOS devices Zero-latency direct monitoring S/PDIF Digital OutputReady to get serious with iPad recording? Step up to the TASCAM iU2 pro-quality ...
Rosendahl MIF 4 Professional MIDI Timecode Interface
Â Rosendahl MIF 4 Professional MIDI Timecode InterfaceÂ Digital audio workstations as well as lighting and show control software make use of MTC midi timecode for synchronisation. The new mif4 provides professional interfacing to standard LTC (SMPTE) timecode. Rosendahl sync algorithms suppress timecode jitter and drop outs.Â SOURCE = LTC read LTC (SMPTE) timecode, display and convert into MTC/USB midi time code and regenerate LTC (SMPTE) timecode. SOURCE = MIDI read MTC from MIDI input, display and convert into LTC (SMPTE) and regenerate MTC/USB midi timecode. SOURCE = USB read MTC from USB, display and convert into LTC (SMPTE) and regenerate MTC/USB midi timecode. SOURCE = GEN the timecode generator can be set up and started manually or remote controlled by MMC midi machine control comands. FPS timecode standards are automatically detected and displayed by the four FPS LEDs (24, 25, 30 Frames Per Second, DF is SMPTE Drop Frame standard). DISPLAY = TC shows timecode in hours, minutes, seconds and frames. DISPLAY = UB SMPTE user bits, 8 nibbles shown hexadezimal. DISPLAY = CAL informs about timecode speed. 29.97 non drop timecode for example is indicated by 30 FPS LED and calibration 0.9990. DISPLAY = REF PAL or NTSC video syncs (576i, 480i) as well as HD tri-level syncs (720p, 1080i, 1080p) are automatically detected and displayed along with their frame rate.
IRIG PRO UNIVERSAL AUDIO/MIDI INTERFACE FOR IOS DEVICES AND MACS
Manufacturer: IK Multimedia
Brand: IK Multimedia
With an IK Multimedia iRig PRO, you can comfortably stick a phantom-powered microphone preamp, a MIDI interface, and a 24-bit audio interface with DI for your guitar in your pocket. This brilliantly simple yet freakishly versatile little devices takes a Swiss-army-style approach to music gear, giving you exactly what you need and leaving the fat behind. With its XLR combo jack, you can connect any microphone, instrument, or line-level source straight to your Mac or iOS gizmo. The iRig PRO even features a low-noise external gain control so you can set levels with the flick of your thumb. Whether you're laying down some lyric ideas with your laptop or fleshing out your next song at the cafe with your iPad, you'll be surprised how often you reach for your IK Multimedia iRig PRO interface.