Compatible with ProTools M-Powered Software! The FireWire 18/14 is an 18-in, 14-out audio interface complete with ADAT Lightpipe for multi-channel communication with other digital devices. It features 8 x 4 analog I/O at up to 24-bit/96kHz, and boasts 192kHz on the first two inputs and all four outputs. Channels 1 and 2 also include high-quality microphone/instrument preamps. S/PDIF optical digital I/O provides 2-channel PCM, as well as pass-through of surround-encoded AC-3 and DTS material. Flexible internal mixing allows input and output routing, including an aux bus for effects send or monitor mix. A front-panel momentary switch allows allows DJ-style headphone auditioning between two assignable sources. Other features include two headphone amplifiers, assignable level controller, S/PDIF coaxial/optical digital I/O, 1 x 1 MIDI I/O, and BNC word clock connectors for synchronization to other digital devices. 18 x 14 FireWire audio interface 8 x 24-bit/96kHz analog inputs (1/4? TS) 4 x 24-bit/96kHz analog outputs (1/4' TRS/TS) 2 x 4 24-bit/192kHz analog I/O capability 8 x 8 ADAT Lightpipe I/O digital S/PDIF (coaxial) I/O w/ 2-channel PCM digital out also supports pass-through of AC-3/DTS surround-encoded content dual mic/instrument preamps (Neutrik XLR/ 1/4? TS) with: input level controls; 20dB pad; phantom power; signal LEDs two independently assignable headphone outputs with individual level controls (1/4" TRS) flexible software...
8 x 4 24-bit/96kHz analog I/O (1/4? TS) or 2 x 4 24-bit/192kHz analog I/O
8 x 8 ADAT Lightpipe I/O with S/MUX support for 4-channel 96kHz operation
Digital S/PDIF (optical/coaxial) I/O w/ 2-channel PCM
Digital out supports pass-through of AC-3/DTS surround-encoded content
Dual mic/instrument preamps (Neutrik XLR/ 1/4? TS) with input level controls, 20dB pad, phantom power and signal LEDs
Product Information Specifications for M-Audio MIDIman FireWire 18/14 18-in, 14-out Musical Instrument MIDI Interface Below:
Premium-quality audio interface for your iOS device, that's ready for any studio. TASCAM's iU2 is a premium sound quality audio interface for the iPad, iPhone and iPod Touch. It includes all of the features of TASCAM's best-selling USB audio interfaces, including a pair of precision audio microphone inputs. The XLR inputs have phantom power for use with high-quality condenser microphones. These feed an onboard microphone preamp and A/D converter for better sound performance than those built into iPhone and iPad - true stereo recording with low noise and less tendency to distort. The inputs also accept line-level signals or you can plug a guitar or bass directly into your device.In addition to compatibility with iOS devices, the iU2 also works with Mac and Windows computers. A zero-latency monitoring path allows musicians to hear themselves directly through the unit, without any distracting delay. Both MIDI in and out are provided to easily interface with synths and drum machines, and a digital output connects to digital mixers or recorders.Features Audio/MIDI Interface for Mac, Windows and iOS devices Compatible with iPhone, iPad and iPod Touch Two XLR mic inputs with phantom power Two balanced line inputs Instrument-level input for guitar or bass MIDI in and out Onboard A/D conversion for low-noise and distortion when recording with iOS devices Zero-latency direct monitoring S/PDIF Digital OutputReady to get serious with iPad recording? Step up to the TASCAM iU2 pro-quality ...
Rosendahl MIF 4 Professional MIDI Timecode Interface
Â Rosendahl MIF 4 Professional MIDI Timecode InterfaceÂ Digital audio workstations as well as lighting and show control software make use of MTC midi timecode for synchronisation. The new mif4 provides professional interfacing to standard LTC (SMPTE) timecode. Rosendahl sync algorithms suppress timecode jitter and drop outs.Â SOURCE = LTC read LTC (SMPTE) timecode, display and convert into MTC/USB midi time code and regenerate LTC (SMPTE) timecode. SOURCE = MIDI read MTC from MIDI input, display and convert into LTC (SMPTE) and regenerate MTC/USB midi timecode. SOURCE = USB read MTC from USB, display and convert into LTC (SMPTE) and regenerate MTC/USB midi timecode. SOURCE = GEN the timecode generator can be set up and started manually or remote controlled by MMC midi machine control comands. FPS timecode standards are automatically detected and displayed by the four FPS LEDs (24, 25, 30 Frames Per Second, DF is SMPTE Drop Frame standard). DISPLAY = TC shows timecode in hours, minutes, seconds and frames. DISPLAY = UB SMPTE user bits, 8 nibbles shown hexadezimal. DISPLAY = CAL informs about timecode speed. 29.97 non drop timecode for example is indicated by 30 FPS LED and calibration 0.9990. DISPLAY = REF PAL or NTSC video syncs (576i, 480i) as well as HD tri-level syncs (720p, 1080i, 1080p) are automatically detected and displayed along with their frame rate.
IRIG PRO UNIVERSAL AUDIO/MIDI INTERFACE FOR IOS DEVICES AND MACS
Manufacturer: IK Multimedia
Brand: IK Multimedia
With an IK Multimedia iRig PRO, you can comfortably stick a phantom-powered microphone preamp, a MIDI interface, and a 24-bit audio interface with DI for your guitar in your pocket. This brilliantly simple yet freakishly versatile little devices takes a Swiss-army-style approach to music gear, giving you exactly what you need and leaving the fat behind. With its XLR combo jack, you can connect any microphone, instrument, or line-level source straight to your Mac or iOS gizmo. The iRig PRO even features a low-noise external gain control so you can set levels with the flick of your thumb. Whether you're laying down some lyric ideas with your laptop or fleshing out your next song at the cafe with your iPad, you'll be surprised how often you reach for your IK Multimedia iRig PRO interface.
The MIDI Solutions R8 8-output MIDI-Controlled Relay Array provides eight contact closures which can be programmed to open or close in response to MIDI events. Event types are programmable and include Note, Control Change, Program Change, and System Exclusive messages (up to 20 bytes/System Exclusive message). All settings are retained even after power is removed from the unit. Fast reed relays are used for a response time of less than 2ms. Relay contacts are rated at 0.5A. Contacts are made available via connections to the tip and sleeve of 1/4 inch mono phone jacks.
The Studioone Artist is an exceptional DAW software package, for Mac OS X and Windows XP and Vista that makes producing high-quality projects easier than ever before. As part of the Studio One Artist package, you get 20 new PreSonus Native Effects plug-ins and virtual instruments and a generous bundle of third-party loops, software, and instrument sounds. The Studio One Artist features lots of drag and drop functionality and the best user interface we have ever seen. Features: All-meat, no-bloat, music-creation software with an intuitive, practical, single-window interface Unlimited tracks, insert effects, sends, virtual instruments, buses, and effects channels Powerful drag-and-drop functionality Content browser with convenient sort options and preview player Full-featured, flexible automation Powerful real-time auto/manual time-stretching and resampling engine Control LinkTM (advanced MIDI mapping made easy) Twenty 32-bit Native SoundTM plug-ins, including reverbs, amp modeling, and EQ Four new virtual instruments, including a sampler and an analog-type subtractive synth Ability to control the software mixer in any FireStudio-series interface to create zero-latency cue mixes. 24-bit / 44.1, 48k USB audio recording interface 2 class A XMAX microphone / instrument preamplifiers 48V phantom power 2 balanced TRS outputs MIDI input/output Powered via USB Audio Technica ATH-M20x Closed-Back Dynamic Studio Monitor Headphones Type: Closed-back dynamic Driver Diamete...