The ART PS 4x4 Rackmount 8 Outlet Power Conditioner is a low-cost AC power solution for rackmount systems. The PS 4x4 can be installed into the top slot of a rack, and the eight switched AC outlets in the rear panel will power up and protect all your equipment, up to a 15A load. The dual backlit linear voltage and amp meters display respectively incoming voltage and load current in amperes. This additional meter gives an analog "real-world" look at how much power you are using. In addition, the two slide-out, swiveling light fixtures provide illumination for all your gear. They are adjustable via the front-panel dimmer control.
The MD-800 Power Conditioner from Marathon is ideal for your equipment rack with its LED voltage display, rack lights, and RFI/EMI filters. The rear panel has 8 outlets and 1 switched front panel outlet.
The PDI06 is a power attenuator for live applications. The device is connected between the amplifier output and the speaker cabinet. It makes it possible to use the popular power stage distortion of tube amplifiers while reducing the associated high volume level. This permits practical volume reduction in six increments from 100% to 18% for stage and practice room situations. An additional setting mutes the speaker completely; the PDI06 then functions as a LOAD BOX and absorbs the entire output power of the amplifier. This mode of operation is useful, for example, when connecting an amplifier equipped with a speaker cabinet emulation directly to the mixing desk using an existing line-out and loud volume levels in the recording booth are undesirable. The unit has an input for the speaker signal from the amplifier and two outputs for connecting speaker cabinets. The total impedance of the speakers must equal the value shown on the PDI06. For example: the outputs of a PDI06 that is specified for 8 ohms can be connected to one 8 ohm cabinet or two 16 ohm cabinets (the 16 ohm version has only one output). The output of the (tube) amplifier is also set to 8 ohms.
Manufacturer: Golden Age Project
Brand: Golden Age Project
The PS-AC4 power supply is a convenient way of supplying power to up to four Golden Age Project half rack units that use 24V AC. Each output is fed by a separate transformer winding and can supply a maximum of 500 mA.
Juice Goose RP 100 15 Amp Rackpower Series Power Monitoring Conditioning and Distribution
Manufacturer: Juice Goose
Brand: Juice Goose
The two function meter reports in easy to read LED numerals the status of your power supply and consumption. Toggle between volts and amps with a convenient push button on the front of the chassis. Voltage is measured to the nearest 0.10 VAC. Amperage is measured to the nearest 0.10 amperes in a range from 0.20A to 25.0A. One USB port is provided on the front and one on the back of the chassis. These five volt DC connections are usable for utility lighting or powering accessories. Connect an inexpensive, flexible USB light fixture for lighting in the front or back of the rack. Both USB ports can also be used to charge accessories including an iPhone or iPad.
The MC403 Power System-a collaboration between Bob Bradshaw and the MXR design team-is truly the ultimate power supply. The MC403 powers more types of pedals and electronics at one time than any previous power supply unit available. High quality, high performance toroidal transformers ensure quiet operation with superior performance capabilities. Designed for maximum flexibility, the MC403 can be used on pedal boards or rack mounted in a single rack space with the front mount bracket (included). All multi-tap outputs are completely isolated, linear regulated, and shortcircuit protected. Enclosed in a heavy-duty housing, the MC403 is designed for years of rugged road or studio use.
The Furman M-8Dx Merit X Series 8 Outlet Power Conditioner is a low-cost AC power solution for rack mount systems. Install an M-8Dx in the top slot of your rack, and the eight switched AC outlets in the rear panel will power up and protect all your equipment, up to a 15A load.