Our CatalogBags & CasesComputer RecordingHeadphone & In-Ear Audio MonitorsLighting Equipment & AccessoriesMastering RecordersMicrophonesMixers & AccessoriesMonitor, Speaker & Subwoofer PartsMonitors, Speakers & SubwoofersBags, Cases & CoversSpeakersStage MonitorsStage Speaker StandsStage SubwoofersMultitrack RecordersPA SystemsPortable RecordersPower AmplifiersPower ConditionersSignal ProcessorsSpecial EffectsStage & Studio CablesStudio EnvironmentStudio MonitorsStudio Subwoofers
Monitors, Speakers & Subwoofers - Page 21
Pyle PADH215 2000W Heavy Duty Speaker MDF Construction with Reinforced Corners
Heavy Duty MDF Construction w/ Reinforced Corners 6" x 17" Super Horn Midrange/ Tweeter 1.5" Titanium Compression Dreiver Loaded in Horn Five Piezo Tweeters 2 x 15" Subwooofer 2.5" Kapton VC Woofer Magnet Weight: 90 oz Compression Tweeter Magnet Weight: 20 oz Ported Enclousure for Added Bass Response Heavy Duty Handles for Easy Portability Dual Speakon Dual 1/4" Jacks Binding Post Terminals Built in Crossover Network Power Handling: 1000Watts RMS/ 2000 Watts Peak Frequency Response: 35-20K Hz Sensitivity (1w/1m): 107dB Impedance: 8 Ohms Dimensions: 19.8" (W) x 16" (D) x 48.8" (H)
Electro-Voice ZLX12P Two-Way Powered 12" Loudspeaker
The Electro-Voice ZLX-12P 12" Two-Way Powered Loudspeaker is a compact and versatile loudspeaker featuring custom engineered drivers in a rugged enclosure. The loudspeaker features a grille made of 18-gauge steel with black powder coat. The loudspeaker matches the specially developed drivers with a custom-built Class-D amplifier module and powerful DSP. Whether pole mounted or used as a floor monitor, the loudspeaker delivers powerful sonic impact and intelligibility. Frequency Range 50 Hz - 20 kHz Maximum SPL 126 dB Power Rating 1000 W Frequency Response 65 Hz - 18 kHz Coverage (Nominal -6 dB) H 90 ° Coverage (Nominal -6 dB) V 60 ° LF Transducer EVS-12K, 300 mm (12 in) Woofer HF Transducer DH-1K Connector Type (2) XLR/TRS Combo Jack, (1) 3.5 mm Input, and (1) XLR link Output Enclosure Material Polypropylene Grill 18 Gauge Steel with Black Powder Coat
Yamaha DXR8 Powered Speaker Cabinet
Pump out some seriously pristine sound with Yamaha's DXR8 powered loudspeakers. These 8" loudspeakers are powered by a 700-watt Class D amplifier in a bi-amped design that provides incredible output in an ultra-lightweight design. Whether you're using a pair of DXR8s with a DXS sub as a complete sound system for your band, or just playing solo gigs at the coffee shop plugged into the DXR8's built-in three-channel mixer, you've love the balance of performance and convenience you get. The DXR8 has a ton of innovative technology inside to give you the best possible live sound, but you don't need to understand the tech details - just plug into the Yamaha DXR8 powered loudspeaker and you'll love what you hear.
Yamaha DXR10 Powered Speaker Cabinet
Yamaha DXR Series Loudspeaker sever since we first started developing professional audio equipment in the 1960s, we've made it our goal to stay at the forefront of the technology curve. The DXR Series is comprised of four full-range models perfectly suited for front-of-house sound, monitors, simple amplification, rigged applications and more. Combining the series with our newly designed DXS subwoofers will further elevate your system's performance, giving you versatile control of its thunderous bottom end. DXR10 - 10 2-way Active Loudspeaker Portable, yet capable of producing an astonishing 131 dB SPL, the DXR10s compact, functional design makes it ideal for a wide range of applications. Whether comprising a compact SR system or providing simple vocal / instrument amplification, the onboard mixer eliminates the need for an external mixer - without compromising sound quality and power. Features: Speaker type 10" 2-way, Bi-amp powered speaker, Bass-reflex type Frequency Range (-10dB) 56Hz - 20kHz Ultra-Precise 48Bit DSP Processing for High-Definition Sound Intelligent Dynamic Control for Consistent Clarity at Any Output Level Extensive DSP Protection Functions for Maximum Output High-Efficiency 1100W Class-D Amplifiers Intelligent Onboard 3-Channel Mixer DXR Series Transducers Meticulously Selected and Thoroughly Customized to Deliver Ultimate Performance Durable, Compact ABS Enclosures Symmetrical Enclosure Design for Mirror-Mode Floor Monitoring Dual-Angle Pole Mount Socket Rigging Points for Standard Eye-Bolts and Optional U-Brackets
ION Audio Clipster Active | Bluetooth Clip-On Outdoor Speaker with Waterproof Rubber Covering & Mounting Bracket
Whether you’re hiking, biking, camping, boating, or climbing, ION Audio's Clipster Active is ready to go along for the adventure with its heavy-duty rubber covering and waterproof speaker. Stream music from any Bluetooth music player or phone. Answer phone calls easily without having to dig your phone out of your backpack. Wherever you’re headed, Clipster Active is ready. Tech Specs Battery: Built-in rechargeable lithium-ion battery Battery Life: 3-4 hours (at max volume); 15-20 hours (at 50% volume) Waterproof level: IPX4, protected against splashing water from any angle Power input for charging: 5V DC, 0.2A Speaker Output: 1.5W Supported Bluetooth Profile: A2DP, HFP, and AVRCP Includes Clipster Active Active Mount with Strap USB Charging Cable Quickstart Guide Safety & Warranty Manual
24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors (price per set, each set consists of 2 speakers)
Acousta-Stuf Polyfill Speaker Cabinet Sound Damping Material 1 lb. Bag
Acousta-Stuf Polyfill Speaker Cabinet Sound Damping Material 1 lb. Bag Acousta-Stuf is a synthetic material made from crimped fibers. It is an excellent choice for filling or stuffing small enclosures or transmission line cabinets. Long fiber wool has been a favorite among serious speaker builders but Acousta-stuf is less expensive than long fiber wool and does not have the problem of harboring moths. Acousta-StufTM will also outperform Dacron, foam, and fiberglass. Acousta-Stuf is a sound absorption, dampening fiber that will deepen bass, provide cleaner midrange and improve the dynamic extension of any speaker system. There are no health hazards with Acousta-Stuf and no mask or gloves are needed when using this product; the melting point is a very high 490°F. Most sealed and vented enclosures require 1/2 lb. of dampening material per cubic foot of enclosure. For best results it is recommended to loosely fill the material throughout the enclosure.
Alto Professional TSL115 | 15" 2-Way Active Speaker with Interactive LED Array (800W Peak / 400W Continuous)
We’ve taken our incredibly popular and successful 15-inch, 800-watt TS115A Active Loudspeaker, and added excitement and capability of an interactive , built-in circular LED array. Alto Professional’s TSL115 powered speaker fulfills all your requirements with an easily-transportable, easy-to-set up unit. The TSL115 combines Alto’s signature sound with exciting lighting, turning an ordinary event into a memorable special occasion. Technical Specifications Output Power 800 W peak (670 W LF + 130 W HF) 400 W continuous RMS (335 W LF Class D + 65 W HF Class AB) Low Frequency: 15” woofer, 2” voice coil High Frequency: 1” neodymium driver Crossover: 2,000 Hz Maximum SPL: 122 dB continuous, 125 dB peak (@ 1 m) Frequency Response: 48 Hz – 18,000 Hz (@ -10 dB) Coverage: 80°/100° H x 60° V nominal Connectors: (1) 1/4” TRS or XLR input (1) XLR Link Output Light Type: 72 tri-color (red-green-blue) high-intensity LEDs; 22 W total; sound-reactive Modes: Mood, Meter, Mix, Pulse, Party Controls: Mode selection knob; color selection knob with RGB preview LED; brightness knob Cabinet: Trapezoidal polypropylene housing External Control: Volume control, power-on with LED, clip limiter with LED, ground lift Power: AC Input: 100–120/220–240 V, 50/60 Hz Fuse: 100-120 V T1.6AL AC250V / 220-240 V T800mAL AC250V Inrush current at initial switch-on: 3.61 A Inrush current after power supply interruption: 3.91 A Dimensions (width x depth x height): 26.7” x 16.9” x 15.2” Weight: 41.0 lbs Box Contents TSL115 Power Cable User Guide Safety & Warranty Manual
Alto Professional TS115A | 15" Active 2-Way PA Loudspeaker with Integrated Mixer (800W Peak / 400W Continuous)
Total Transparency The Truesonic Series was designed from the ground up to be the most transparent loudspeaker in its class. Rigorous testing and thousands of hours of listening have gone into making sure that what you pump into a Truesonic speaker is exactly what you get out. Everything you see (and some things you don’t) – from internal signal path and components used to the sculpted cabinet and meticulously designed waveguide – was developed in service of the principle of accurate, transparent sound. High Performance With Modern Design Integrated Carrying Handles Make Transport Easy Built-in Mixer The TS115A’s built-in mixer gives you an added level of versatility and convenience. Two Mic/Line combo inputs are located on the back of the speaker, so you can plug microphones and instruments in directly and find the perfect blend via two independent volume controls. You won't need to be a live sound guru to figure out how to EQ the speakers thanks to the built-in Contour EQ switch, which is great when you need an EQ alternative for recorded music playback. Versatile Cabinet Design All Truesonic 2-way speaker cabinets have been designed with versatility and longevity in mind. They feature a durable, lightweight polypropylene enclosure that is stand mountable for weekend gigs and flyable for more permanent installations. What's more, they have a trapezoidal design which greatly decreases the resonance of the standing wave in the cabinet for a more true and exact sound reproduction. The Truesonic TS115A is the perfect solution for musicians and DJs on the move and halls, malls, schools, houses of worship and more. You can never be too safe around the stage. We know stuff happens that you just can't predict. Sometimes it's the flying drumstick, a falling mic stand or worse. Every Truesonic speaker comes with a complete front metal grille from top to bottom that protects not only your low frequency driver, but your high frequency driver as well. With Truesonic speakers, you get extra peace of mind knowin...
PYLE-PRO PPHP1085A 600 Watts 10-Inch Powered 2 Way Plastic Molded Speaker System
With 600 watts of peak power and designed for optimal sound performance, the PPHP1085A is an affordable way to give your live performances an extra kick, or is a great addition to your existing PA system. Click here for a larger image Features XLR jacks and volume controls so you can customize your sound Click here for a larger image Create the perfect sound environment by using the 35mm speaker stand mount to bring your system up to optimal listening levels 1” Titanium Compression Driver The tweeter is built with a 1” titanium compression driver, which reproduces high-frequency sounds with high quality and incredible clarity. XLR Jacks for Professional Quality Sound The PPHP1085A features a balanced XLR Mic and Line Input and XLR output, giving you the highest quality sound possible out of your connections. Balanced audio jacks give you less sound interference when using your cables so you can run them long and still get the clearest sound possible. Play Your iPod, CD Player, and More The unit also features a stereo RCA audio input so you can easily connect external audio devices to your loudspeaker. Customize Your Sound Adjust the sound to your liking with the treble and bass controls. You can also control master volume, the line level, and mic volume. Built-in Speaker Stand Mount Features a 35mm speaker stand mount on the bottom of the unit – that way you can enhance the sound of your event by putting the speakers at optimal listening level.