ART PB4x4PRO Power Distribution System
Huge Savings Item! Save 15% on the ART PB4x4PRO Power Distribution System by ART at Right Clearing. MPN: PB4X4PRO. Hurry! Limited time offer. Offer valid only while supplies last. Presenting the 4x4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably
Presenting the 4x4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption.
All PRO SERIES models have an additional internal discrete module called APFTM (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range.
By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond.
Every PRO SERIES power conditioner is designed with a power capacity of 1800 Watts, surge/spike protection, APF with EMI & RFI filtering, front-mounted unswitched power outlet and an adjustable rear-mounted gooseneck light source for bright illumination behind the rack. The spacing and alignment of the rear outlets to accommodate various size power plugs and AC adapters.
Features & Highlights
- APF - Advanced Power Filtering
- Power Capacity of 1800 Watts
- Surge & Spike Protection
- 8 Rear Outlets with Power Adapter Friendly Positioning
- Rear Mounted Gooseneck Light Source
|Item Weight:||6.3 pounds|
|Package Weight:||6.35 pounds|
|Package Size:||9.8 x 2.4 x 2.4 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by ART, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: RS-1, ean: 0654061002178,
Furman RS-1 Remote System Control of Furman Power Sequencers, Keyswitch Panel, Maintained Contact On/Off Sequence...
By Gem Sound
mpn: GL99_6, ean: 0643595002457,
Power Surge protection circuitry.Dual lights with light dimmer control.8 AC rear outlets.19 inches Rack Mounted.Power Surge protection circuitry. Dual lights with light dimmer control. 8 AC rear outlets. 19 inches Rack Mounted. ...
mpn: PC-25, ean: 0012302330457,
Noise Filter, MFG# PC-25, w/25 amp capacity. Operates on 6-48VDC systems....
mpn: LLS-2, ean: 0614859078754,
Increase or decrease signal voltage (-10dBV and +4dBu) and eliminate ground loop hum simultaneously. Converts between balanced and unbalanced signals. 2 channel box.Increase or decrease signal voltage -10dBV and +4dBu without adding noise. Also conta...
mpn: D10PFP, ean: 0803982966599,
10 rear panel outlets for your equipmentHeavy duty 6 foot, 14 AWG Cord. Circuit breaker protected. Rated 15 amps. 10 Rear Panel Outlets. Sturdy One Rack Space Design. Heavy-Duty, 6-Ft, 14-Gauge Cord. Circuit-Breaker Protection. 15 Amps. ...
mpn: 604830, ean: 0889028043134,
Most sound reinforcement professionals realize the majority of equipment damage occurs while devices are either powered up or powered down. Power sequencing allows A/V equipment to be powered up in stages, which gives equipment time to idle before th...
mpn: SP4x4, ean: 0840402011750,
The Smart Power 4x4 features a unique "4x4" distribution on the back of the unit.Circuit Breaker: 15 Amp; Front Location. Filtering: EMI and RFI. Light Pipes: 2 Front Pull-Out, Shock Mounted. Power Capacity: 1800 Watts. Dimensions: 1U Rack Mountable....
mpn: HE-2, ean: 0614859056615,
Eliminates ground loop hum. Just plug the HE-2 in between the offending pieces of equipment and your done. Also converts balanced and unbalanced signals. 2 channel box version. No power required, two-year warranty.Uses 1:1 isolation transformers to b...
Product Description The power station is the leading models of the Mugig for effect pedals, with 4 outlets fully regulated and filtered 9 volts. Function: The MPS-2 goes in self-protection mode and it will auto-restart in about 2 seconds once you unp...
Features:- EMI and RFI noise filtering: eliminates unwanted radio frequency and electromagnetic interferences- Protects connected loads from surges, spikes, lightning, and other power disturbances- 8 front panel indicators provide information on powe...