BNC Gooseneck XLR Flexible Light 0.5W 12 volts 18 inches LED Console Lamp for Mixers (BNC Connector)
Extreame Savings Item! Save 45% on the BNC Gooseneck XLR Flexible Light 0.5W 12 volts 18 inches LED Console Lamp for Mixers (BNC Connector) by Rejea at Right Clearing. MPN: 10800073. Hurry! Limited time offer. Offer valid only while supplies last. Specifications: Input DC 12VLength approx. 18 inches (45cm)Notice Before Purchase Read the manual of your mixer device and check the data sheet. Then
Input DC 12V
Length approx. 18 inches (45cm)
Notice Before Purchase
Read the manual of your mixer device and check the data sheet.
Then choose what you need according to the positive and negative pole of our LED light needles.
If the LED light cannot match the corresponding needle of your equipment, please don't make purchase, because you will need to re-welding it by yourself which requires professional technology knowledge.
In this case, we recommend our New Arrival Product : Automatic Series - Automatically adjust the voltage(5.5V-16V), distinguish between positive and negative pole, Suitable for most of Musical Console Mixer.
-Rejea 5.5V-16V Voltage Automatically Adjustable LED Console Lamp
Note: This lamp will not work on Normal 3 Pin XLR/ 4 Pin XLR/ BNC connectors( because of Volt issue), make sure your mixing console has the Specific 12-Volt Task Light Connector for this led lamp.
Q: How does this lamp work?
A: Consoles require a dedicated 12-volt task light connector for use of this lamp. So this lamp will not operate on a phantom powered mic input. Because the standard for phantom power is +48 volts applied to BOTH sides of the audio signal pair through two resistors, with the V- connected to ground and shield, too high for efficiently driving LED.
Durable & long-lasting LEDs, High efficiency more light for less energy.
Cool operating temperatures adjust without burning your fingers.
Have tested with following models
4 Pin XLR
SOUNDKING AS3208, MIX32AU
Peavey CD MIX 7032A VENUE SC48, Screen Pro2,
Mackie Onyx 24.4 console
Soundcraft Si Impact
Features & Highlights
- 12V LED Lamp for Mixers (Low Voltage Power)
- Flexible Gooseneck LED Light for Mixing Consoles
- High efficiency more light for less energy
- Connector : BNC (NOTE : This led lamp works ONLY on Specific 12-Volt Task Light Socket, please make sure your equipment has one before purchase)
- Length : approx. 18 inches / 45 cm
|Item Size:||0.79 x 0.79 x 0.79 inches|
|Package Weight:||0.16 pounds|
|Package Size:||2.6 x 0.63 x 0.63 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Rejea, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
The U-03R is an AUX module to be used in conjunction with the 900 series and AX-1000 amplifier. It has a low-cut and high-cut filter, gain control, and a Dual RCA connector. For unbalanced,line level equipment such as AM/FM tuners, tape decks and CD ...
mpn: 2650-0008-0000, ean: 0805676301310,
The all-new JAM protective cover is a stylish form-fitting wrap for your JAM or JAM 96k. Made with durable lightweight silicone, the cover provides all the protection you need for jamming on the go.Works with Apogee JAM and JAM 96k. Made with durable...
mpn: 18X-4, ean: 0645578513738,
This is a 4-Pin Straight XLR Connector, 18" Gooseneck low-intensity lightGooseneck lamp that can be built into any device that requires lighting. XLR Connector, 4-pin configuration.. ...
By ModTone Guitar Effects
mpn: MTDB-100, ean: 0608641870909,
MTDB-100 direct box converts any 1/4" signal to a balanced XLR microphone output. This DI box is rugged all metal construction built to last for show after show. Features include a ground lift, to eliminate unwanted hum, a parallel output to run your...
mpn: SL1642- Rack Ear, ean: 0096802718908,
Product Details:Use this handy dandy mounting kit to secure your precious StudioLive 16.4.2 in your rack....
mpn: OP-MSA1, ean: 0761294412985,
This microphone stand adaptor allows you to attach the R-05 or R-09HR to a generic mic stand.Use the R-05 or R-09HR just like a microphone. This microphone stand adaptor allows you to attach the R-05 or R-09HR to a generic mic stand. ...
By K&M Stands
mpn: 16085, ean: 4016842821495,
The new headphone holder including an innovative table clamp is a guaranteed secure and comfortable holder for your headphones. The holder protected with soft rubber can easily hold 2 standard headphone sets and 2 in-ear headphones can additionally b...
mpn: ACC-CK100, ean: 0663961031669,
Four heavy-duty casters for the Mackie HD1801 subwoofer. Use 1 kit per subwoofer.Orginal Mackie Accessory. Add wheels to your Mackie HD1801 subwoofer to make load-in and load-out a breeze. Four heavy-duty casters for 1 HD1801 subwoofer. ...
mpn: SRM650 Cover, ean: 0658700902720,
Use the Mackie SRM650 Cover to extend the lifespan of your prized PA gear. Dust and grime can easily work its way into your loudspeaker via the input and output connectors - unless you've got it covered with the Mackie SRM650 Cover! This nylon speake...
mpn: LAUNCH CONTROL SLEEVE, ean: 0815301000310,
Gigging can be messy work. In fact, just carrying your stuff around in your bag can be a risky undertaking. Especially if you're prone to dropping things or using budget airlines. That's why we designed this protective neoprene sleeve for your Launch...