Accessories - 31 - Blowout Sale! Save up to 80%
Blowout Sale! Up to 80% off on Accessories at Right Clearing. Top brands include Rejea, Toa, Apogee, Littlite, ModTone Guitar Effects, PreSonus, Roland, K&M Stands, Mackie, Novation, Deejay LED, Stagg, Fishman, Zoom, SKB, Yamaha, Raxxess, & ART. Hurry! Limited time offers. Offers valid only while supplies last.
BNC Gooseneck XLR Flexible Light 0.5W 12 volts 18 inches LED Console Lamp for Mixers (BNC Connector)
You Save: 80%
mpn: 10800073, ean: 0669665320887,
4.6 out of 5 stars with 51 reviews
Specifications: Input DC 12VLength approx. 18 inches (45cm)Notice Before Purchase Read the manual of your mixer device and check the data sheet. Then choose what you need according to the positive and negative pole of our LED light needles.If the LED light cannot match the corresponding needle of your equipment, please don't make purchase, because you will need to re-welding it by yourself which requires professional technology knowledge.In this case, we recommend our New Arrival Product :
TOA U-03R Unbalanced Line Input Module with High Low Cut Filters
4.2 out of 5 stars with 284 reviews
The U-03R is an AUX module to be used in conjunction with the 900 series and AX-1000 amplifier. It has a low-cut and high-cut filter, gain control, and a Dual RCA connector. For unbalanced,line level equipment such as AM/FM tuners, tape decks and CD players.Gain Control. High and Low Cut Filters. For unbalanced, line level equipment. Dual RCA connector.
Apogee JAM Cover - Black
You Save: 45%
mpn: 2650-0008-0000, ean: 0805676301310,
4.0 out of 5 stars with 22 reviews
The all-new JAM protective cover is a stylish form-fitting wrap for your JAM or JAM 96k. Made with durable lightweight silicone, the cover provides all the protection you need for jamming on the go.Works with Apogee JAM and JAM 96k. Made with durable lightweight silicone. Protect your JAM from scratches and smudges.
mpn: 18X-4, ean: 0645578513738,
4.4 out of 5 stars with 296 reviews
This is a 4-Pin Straight XLR Connector, 18'' Gooseneck low-intensity lightGooseneck lamp that can be built into any device that requires lighting. XLR Connector, 4-pin configuration..
ModTone Guitar Effects MTDB-100 -Channel Mixer Accessory
By ModTone Guitar Effects
You Save: 2%
mpn: MTDB-100, ean: 0608641870909,
4.0 out of 5 stars with 284 reviews
MTDB-100 direct box converts any 1/4'' signal to a balanced XLR microphone output. This DI box is rugged all metal construction built to last for show after show. Features include a ground lift, to eliminate unwanted hum, a parallel output to run your instrument through an amplifier at the same time you send signal to the sound system, great for monitoring your performance, and a 3 way pad to control your signal output including 0dB - signal goes through at full volume, -20dB cuts a hot signal
PreSonus Studio Live 16.4.2 Rack Ears
mpn: SL1642- Rack Ear, ean: 0096802718908,
4.3 out of 5 stars with 293 reviews
Product Details:Use this handy dandy mounting kit to secure your precious StudioLive 16.4.2 in your rack.Use this handy dandy mounting kit to secure your precious StudioLive 16.4.2 in your rack..
Roland Microphone Mount (OP-MSA1)
mpn: OP-MSA1, ean: 0761294412985,
4.9 out of 5 stars with 47 reviews
This microphone stand adaptor allows you to attach the R-05 or R-09HR to a generic mic stand.Use the R-05 or R-09HR just like a microphone. This microphone stand adaptor allows you to attach the R-05 or R-09HR to a generic mic stand.
K&M Stands 16085.000.55 Headphone holder with table clamp
mpn: 16085, ean: 4016842821495,
4.8 out of 5 stars with 103 reviews
The new headphone holder including an innovative table clamp is a guaranteed secure and comfortable holder for your headphones. The holder protected with soft rubber can easily hold 2 standard headphone sets and 2 in-ear headphones can additionally be hung on the front. The headphone holder can be fixed in four different directions using the clamping screw. In addition, the holder can be rotated from any position by 90 Degree. The clamp can be extended from 0 to 1.889'' allowing it to be
Mackie Caster Kit for HD1801 subwoofer (ACC-CK100)
mpn: ACC-CK100, ean: 0663961031669,
4.9 out of 5 stars with 229 reviews
Four heavy-duty casters for the Mackie HD1801 subwoofer. Use 1 kit per subwoofer.Orginal Mackie Accessory. Add wheels to your Mackie HD1801 subwoofer to make load-in and load-out a breeze. Four heavy-duty casters for 1 HD1801 subwoofer.
Mackie SRM650 Speaker Cover
mpn: SRM650 Cover, ean: 0658700902720,
4.8 out of 5 stars with 137 reviews
Use the Mackie SRM650 Cover to extend the lifespan of your prized PA gear. Dust and grime can easily work its way into your loudspeaker via the input and output connectors - unless you've got it covered with the Mackie SRM650 Cover! This nylon speaker cover fits snugly over your Mackie SRM650, protecting it from bumps and scratches. Cutouts on the sides allow for handle access, so it's easy to transport your speakers while they're covered. If you want the best for your gear, protect your
Novation Launch Control Sleeve
mpn: LAUNCH CONTROL SLEEVE, ean: 0815301000310,
4.1 out of 5 stars with 161 reviews
Gigging can be messy work. In fact, just carrying your stuff around in your bag can be a risky undertaking. Especially if you're prone to dropping things or using budget airlines. That's why we designed this protective neoprene sleeve for your Launch Control. It fits snugly over its knobs to protect them from scrapes, bumps, drops, bangs, whacks and very light elbow drops. Features: Novation Launch Control Protective Sleeve Carry Case Doesn't weigh you down because it's super lightweight Fits
DEEJAY LED TBH14UADW Rack With Wheels
You Save: 37%
mpn: TBH10MIXE, ean: 0816794020762,
4.8 out of 5 stars with 17 reviews
* 14u Professional DJ Amplifier Case with 18-Inch Standard Depth* Electronics equipment safe travel case designed for touring.* Four chrome plated heavy duty spring loaded retractable carry handles.* ATA-300 type durable transport case is a heavy duty professional style with industry recognized impact standards ideal for safe travel.* 3.5-in durable and noiseless casters for ease of transportation w/ heavy duty bottom castor board for added support.* 3/8-in thick laminated plywood for optimal
DEEJAY LED TBHZED22FX24 Fly Drive Case For Allen & Heath ZED22fx/ZED24 Mixer
You Save: 5%
mpn: TBHZED22FX24, ean: 0816794020533,
4.9 out of 5 stars with 45 reviews
* ATA-300 Style Quality Durable Case * Industrial Grade Recessed Spring Loaded Split Dish Butterfly Closure Latches with Padlock Tab with a Shackle Opening of about 7mm. * Heavy Duty Ball Corners w/ Stacking Dimple On Bottom Side Allows for Centering and Stability when Stacking Multiple Units. * ATA-300 Style Durable Transport Case is a Heavy Duty Professional Style With Industry Recognized Impact Standards Ideal for Safe Travel. * Well Riveted Heavy Duty Double Edge Tongue and Groove Impact
Stagg SDI-ST 2-Channel Passive DI Box with Mono/Stereo Switch
You Save: 3%
mpn: SDI-ST, ean: 0882030186172,
4.5 out of 5 stars with 222 reviews
Mix, amplify, connect: get great sound quality with Stagg's extensive range of high fidelity audio products that combine reliability and accessibility!Die cast black metal housing with high impedance input jack for pick-up, mic, instrument, etc. in each channel. High impedance output jack for routing original signal to amplifier. Low impedance balanced XLR output for use with mixing consoles. Ground lift switch to reduce hum problems. Suitable for stage, studio, and broadcast applications.
Fishman SA Slip Cover (ACC-SUB-SC3)
mpn: ACC-SUB-SC3, ean: 0605609155054,
4.5 out of 5 stars with 45 reviews
Appearance and performance is everything to keep getting gigs. The ACC-SUB-SC3 SA sub slip cover provides protection plus keeps your sub in like-new Condition. Your equipment is a reflection of your commitment to your music so proudly display that you use Fishman speakers, the best in portable PA systems.The ACC-SUB-SC3 SA sub slip cover provides protection plus keeps your sub in like-new condition. Proudly display that you use Fishman speakers, the best in portable PA systems. 1-Year Warranty.
Zoom Mixer Accessory (RKL-12)
You Save: 8%
mpn: RKL-12, ean: 0884354018658,
4.9 out of 5 stars with 56 reviews
Take your livetrak on the road with the Zoom RKL-12. The RKL-12 is a steel rack mount adapter that lets you mount your livetrak l-12 in any standard 19” rack. Two adapters with accompanying screws are included with the RKL-12, one for each side of the livetrak.Steel rack mount adapter for livetrak l-12. Lets you mount your livetrak l-12 in any standard 19'' rack. 2 screws (M4 x 8 mm) included.
SKB Pedalboard Soft Case for PS-8 and PS-15 (1SKB-SC2316)
mpn: 1SKB-SC2316, ean: 0789270231610,
4.2 out of 5 stars with 165 reviews
For decades, SKB has been the most innovative manufacturer of top-quality cases and accessories. Famous for their unwavering attention to quality and detail, purchasing an SKB case is sure to provide the most service life of any case on the market. So much so...that SKB offers their Limited Lifetime Warranty on their cases. Buy SKB...buy with confidence. A padded interior, padded carrying handle and shoulder strap provide lightweight portability. The new SKB-SC2316 Pedalboard Soft Case is
Yamaha RK1 Rack Mount Kit
mpn: RK1, ean: 0086792726410,
4.0 out of 5 stars with 72 reviews
Rack mount kit for O1V96 (all versionsproduct includes only the mount kit and not the mixer. Includes all necessary mounting hardware.
Raxxess 17U Rack Rail, Pair, Black
4.4 out of 5 stars with 17 reviews
The Raxxess 17U Rack Rail (Pair) is designed to fit any Raxxess or other brand standard 17U rack cabinet. It is an 11-gauge steel, full whole rack rail. The rail is punched and tapped for 10-32 screws. There are side mounting holes punched in every space. E-Coat finish ensures threads are never clogged.Fits any Raxxess or other brand 17U rack cabinet. Pair of 11-gauge steel full hole rack rails. Punched and tapped for 10-32 screws. Side mounting holes punched every space. No clogged threads
ART Phantom I 48V Phantom Power Supply for Condenser Microphones
sku: 180266, mpn: PHANTOM1, ean: 0840402018339,
4.5 out of 5 stars with 140 reviews
Different condenser microphones specify different amounts of required phantom power. As a rule, these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be more is better.Input Connector: XLR female. Output Connector: XLR Male. Frequency Response: 10 Hz to 25 kHz. Output Noise: -115 dB. Current Drain: 14 mA.
Browse Our Catalog